TL;DR: POS Motherboard Cashier Screen Plus Ad Screen for Convenience Store Counter
AndroidSBC sourcing desk: dual-screen POS board pricing held flat through the current quarter serving Singapore, Singapore. The WF-P3601 POS Android motherboard spans the all-in-one POS terminal with receipt printer and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, eDP plus HDMI output at 4K@60Hz, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Singapore and Singapore importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
The WF-P family covers the full span a Singapore retail group will meet in one refresh cycle: a 2GB entry counter board for small format stores, a 4GB dual-screen tier for restaurants, an 8GB AI tier for face payment, and a wide-temperature industrial tier for unattended cabinets that sit outside. Peripheral validation happens on the Longgang bench with the actual printer, scanner and drawer models the Singapore integrator intends to use, and the result is written into the shipment file rather than left to the integrator to discover on site.
WF-P3601 Technical Specifications
| Parameter | AndroidSBC WF-P3601 (all-in-one POS terminal with receipt printer) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 64GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | eDP plus HDMI output at 4K@60Hz | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 12 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3601 (all-in-one POS terminal with receipt printer) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Singapore importers sourcing the WF-P family, the WF-P3601-A variant is the typical configuration for the boutique retail all-in-one checkout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Singapore Buyers
Then there is the fiscal layer. In Singapore the receipt has to be produced in a form the tax authority recognises, which means the printer handshake, the log retention and the receipt font set have to be right before the first store opens.
AndroidSBC answers the continuity problem with a frozen bill of materials. Each WF-P production lot is built against a fixed BOM and a fixed silicon tier, and the IMDA documentation records the actual parts used, so the Singapore partner re-ordering in a year receives a board that behaves the same way. The 7th release for Singapore - 39600 units on September 23, 2026, Singapore - Shenzhen lane - was built against the same reference image the partner qualified, so the lanes went live without a re-test cycle.
Competitive Comparison: WF-P3601 vs Competing POS Android Boards
For Singapore integrators the decision usually comes down to whether the vendor can hold a BOM, ship a driver set, and produce a test record - the four points below.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
Two forces drive the Singapore POS hardware cycle. The first is the shift to contactless and wallet payments, which pushes the NFC reader and the payment kernel onto the board itself. The second is the regulatory floor - EMV, PCI DSS and national fiscal rules - which forces an upgrade on a timetable the merchant does not control.
- Entry counter tier: WF-P3601 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P3399 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P1330 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
For Singapore buyers the reading is straightforward: the market is growing on replacement, not on first-time installation, so the board that wins is the one that fits the enclosure already on the counter.
Partner Success Story: Albion Till Solutions (pub and restaurant POS integrator)
Aan Albion Till Solutions programme in the United Kingdom hospitality segment illustrates how the WF-P family from AndroidSBC supports Singapore integrators on the ground. Albion Till Solutions deployed 39600 WF-P boards across 77 pub and restaurant sites.
- OEM relationship: AndroidSBC private-label SKU shipped with Albion Till Solutions branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus IMDA conformity, all bundled into the Shenzhen source-factory shipment.
As Albion Till Solutions Hardware Programme Manager for United Kingdom Hospitality explained: Albion Till Solutions took the WF-P board because the contactless path handles the UK ceiling without a firmware fork, with 39600 units across the Singapore estate.
Field Report: boutique retail all-in-one checkout refresh
LONGGANG, September 23, 2026 - Huan Xi, AndroidSBC field desk. Thermal behaviour was the last gate: the WF-P3601 finished the burn-in at the top of the temperature window rather than at 25C, which is the condition a sealed counter actually presents. The WF-P3601 POS Android motherboard order for Singapore, Singapore cleared the burn-in station on schedule and is en route via the Singapore - Shenzhen lane.
The WF-P3601 all-in-one POS terminal with receipt printer production lot includes the WF-P3601-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Singapore integrators, the IMDA type approval with Spring Singapore conformity paperwork is bundled.
Filed by Huan Xi, AndroidSBC field desk, LONGGANG. Singapore buyers ask for IMDA radio approval and prefer the EN-finish variant because most lanes sit in air-conditioned malls.
WF-P3601 Application Scenarios
The WF-P3601 all-in-one POS terminal with receipt printer sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3601-A configuration is the typical build for the boutique retail all-in-one checkout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P3601 drives the cashier screen while the second lane carries the customer display or the promotion wall in Singapore.
- Convenience and small format stores: the WF-P6180 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P5270 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P7600 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P7601 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Singapore: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Singapore Buyers
Three tracks exist because Singapore partners arrive from three directions: as a distributor with stock, as an integrator with a customer, or as a brand owner with a label.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
Whether Singapore partners take distribution, integration or private label, the WF-P board underneath carries the same serialised test record.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support an all-in-one POS terminal with receipt printer?
Answer: Yes. The all-in-one POS terminal with receipt printer is a stock configuration on the WF-P POS Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same peripheral interface before shipment to Singapore.
Which silicon tiers are available in the WF-P family for Singapore buyers?
Answer: RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 are all in production. The RK3568 tier specified here is validated for Singapore compliance with the same evidence pack as the rest.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes, and the configuration is documented per lot. The Singapore partner receives the interface map and the validation report with the shipment, so the counter can be wired without trial and error.
What is the minimum order quantity and the sample lead time for Singapore?
Answer: Samples ship in 1-3 days and the sample MOQ is a single board. Volume production runs on a 15-30 day lead against the frame agreement, and the price list covers tiered volume breaks.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Available on all three tracks. AndroidSBC does AOSP builds, BSP porting, custom boot animation, custom logo and pre-installed apps, with the result held as the Singapore partner reference image.
How are firmware updates delivered to a Singapore estate after deployment?
Answer: Updates go out through the staged OTA channel bundled with the driver SDK. The Singapore partner can hold lanes, pilot on ten, and revert any wave that misbehaves.
What shipping terms does AndroidSBC support for Singapore orders?
Answer: FOB Shenzhen, CIF and EXW terms are all supported, with export customs clearance handled at the factory. The Singapore partner chooses the Incoterm that matches its broker arrangement.
What happens if a board fails in the field in Singapore?
Answer: AndroidSBC holds service stock for Singapore partners on a frame agreement, so a failed board is replaced from that stock while the root-cause analysis runs in parallel.
Contact AndroidSBC: Start Your WF-P3601 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P family. Singapore integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For Singapore and Singapore buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.
