TL;DR: RK3568 1 TOPS NPU Guide Board for Wayfinding Kiosk
AndroidSBC release: twelve-model WF-G smart guide kiosk motherboard family opens for volume orders serving Singapore, Singapore. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Singapore and Singapore importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.
About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family
Why a source factory rather than a trading company: the WF-G smart guide kiosk Android motherboard family is designed, laid out, assembled and tested by Wanlin Manufacturing Group in Shenzhen, which means Singapore integrators deal with the people who control the BOM. Custom display interfaces, custom touch controller pairing, custom memory and storage splits, custom dual-screen configurations and custom payment or ID reader interfaces are all changes that happen at the schematic and layout stage rather than as a favour from a middleman. Singapore buyers also get the failure analysis loop: when a board comes back, the report comes from the line that built it, not from a distributor forwarding a ticket. Certification, carton labelling and palletisation for Singapore are prepared in Shenzhen by the export desk before the Singapore shipment leaves, and the test reports stay versioned against the board revision.
WF-G3601 Technical Specifications
| Parameter | AndroidSBC WF-G3601 (mall smart guide kiosk) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm low-power | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS INT8 NPU | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | HDMI 2.0 4K 60fps plus MIPI DSI | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 12 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Payment peripherals | QR code scanner, NFC, barcode scanner, thermal printer, cash drawer | No bundled payment-peripheral driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Singapore importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Singapore Buyers
The sixth obstacle is lifecycle mismanagement. Singapore programmes that start on a legacy part find themselves two years in with no spare boards, no firmware source and no migration plan, and Singapore venue fit-out cycles are longer than the parts remain in production.
AndroidSBC treats the driver layer as part of the product. The WF-G smart guide kiosk Android motherboard family ships with capacitive and IR touch, QR code, NFC, barcode, thermal printer, RFID, ID card reader, camera and relay drivers integrated, so a Singapore integrator writes the directory application rather than kernel patches for Singapore sites. AndroidSBC has now closed the 7th consecutive quarterly window on this family, with 13600 boards scheduled for Singapore and Singapore on the Singapore - Shenzhen lane as of September 18, 2026.
Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards
The shortlist conversation in Singapore and Singapore rarely turns on clock speed alone. It turns on how quickly a visitor can go from standing in front of a directory to knowing which floor to walk to, and which board vendor has already solved the touch panel, the compliance files and the update path for that moment.
- vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
- vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
- vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
- vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.
Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends
Refresh cycles are lengthening, which favours multi-tier families. Analysts covering Singapore retail and venue technology report that kiosk and directory estates are being specified for seven to ten years rather than three to five, and Singapore programmes are following. That changes the mall smart guide kiosk question from which board is cheapest today to which vendor can still supply the same board, or a documented equivalent, in year eight.
- Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G5270 as the directory plus promotion option.
- Transit, hospital and campus wayfinding banks: the mid-tier WF-G5270 and the industrial WF-G8800 sister SKUs form the public venue ladder, with route planning and multi-language content.
- Promotional walls and in-venue signage networks: WF-G8800 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.
AndroidSBC shares the source tables behind these figures with Singapore and Singapore integrators on request, including the segment splits used for planning.
Partner Success Story: Albion Venue Guides (hospitality and heritage venue supplier)
The Albion Venue Guides case in the UK hospitality and heritage segment is a working example of how the WF-G family from AndroidSBC supports Singapore integrators. Albion Venue Guides installed 13600 WF-G lobby and exhibit guide boards across hotel groups and heritage attractions.
- OEM relationship: AndroidSBC private-label SKU shipped with Albion Venue Guides branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus IMDA conformity, all bundled into the Shenzhen source-factory shipment.
As Albion Venue Guides Visitor Systems Lead for UK Hospitality and Heritage put it: Albion Venue Guides runs heritage sites where the enclosure cannot be modified, and the compact WF-G layout let 13600 existing housings in Singapore take a new board without a mechanical redesign.
Field Report: floor guide counter installation at a community shopping mall
SHENZHEN, September 18, 2026 - Hao Ran, AndroidSBC field desk. The final gate was a driver autoload check: the WF-G3601 boards booted with the full peripheral set attached and enumerated every module before the mall smart guide kiosk content service started. The WF-G3601 smart guide kiosk Android motherboard order for Singapore, Singapore cleared the burn-in station on schedule and is en route via the Singapore - Shenzhen lane.
The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Singapore integrators, the IMDA conformity plus IMDA type approval with Spring Singapore conformity paperwork is bundled.
Filed by Hao Ran, AndroidSBC field desk, SHENZHEN. IMDA plus Spring Singapore; chain retailers favor compact all-in-one POS for hawker-centre style rollouts.
WF-G3601 Application Scenarios
The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.
- Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G6180 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
- Compact countertop enquiry and price check terminals: WF-G5270 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
- Transit, hospital and campus wayfinding banks: WF-G8800 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
- AI product advisory walls and virtual try-on mirrors: WF-G8801 plus WF-G6180 cover the vision and recommendation workload on the device.
- Promotional walls and in-venue signage networks: WF-G5270 plus WF-G8801 ship for continuous-play directory and campaign screens tied to a content calendar.
- Hotel, resort and casino lobby directories: WF-G6180 plus WF-G8800 carry the guest orientation flow in Singapore.
- Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
- Outdoor smart city information pillars: WF-G8801 is positioned for street-level and park cabinets where the temperature range has to hold.
- Venue programmes running in Singapore: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.
Partnership Models for Singapore Buyers
The WF-G family is offered to Singapore and Singapore partners on three commercial tracks, and the choice is about how much of the product the partner wants to put their own name on.
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
- ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
- Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.
All three tracks run on the same twelve-model WF-G family and the same Longgang production line, so Singapore partners can move between them without re-qualifying the platform for Singapore.
Frequently Asked Questions
Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?
Answer: Yes. The mall guide kiosk is a stock configuration on the WF-G family across the Rockchip premium, mid and legacy tiers and the Allwinner entry and industrial tiers, with capacitive and IR touch, QR, NFC, printer and scanner driver support bundled into the source-factory shipment.
What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?
Answer: The RK3568 tier in the WF-G family is one of eight. Rockchip RK3588 8nm runs octa-core Cortex-A76 2.4GHz plus Cortex-A55 with the Mali-G610 MP4 GPU and 6 TOPS NPU. RK3568 22nm runs quad-core Cortex-A55 2.0GHz with the Mali-G52 2EE GPU and 1 TOPS NPU, and RK3566 22nm runs the same core at 1.8GHz with 0.8 TOPS. RK3288 28nm is quad-core Cortex-A17 1.8GHz 32-bit with the Mali-T764 GPU, and RK3399 28nm is dual Cortex-A72 plus quad Cortex-A53 with the Mali-T860 MP4. Allwinner A133 and H618 are 22nm and 28nm quad-core Cortex-A53 entry parts, and Allwinner T527 is a 22nm octa-core Cortex-A55 industrial part with the Mali-G57 MC1 GPU and a 2 TOPS NPU.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Singapore?
Answer: Yes. AndroidSBC ships the WF-G family with CE, FCC, UKCA, RoHS and REACH documentation, plus IMDA conformity and the IMDA type approval with Spring Singapore conformity file set for Singapore. The paperwork travels with the Port of Singapore shipment rather than arriving as a follow-up email.
What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?
Answer: One board can be ordered as a sample on the WF-G family, shipped in 1-3 days. Private label starts at 100 pieces, custom carrier board work at 500 pieces, and volume production is quoted at 15-30 days from the signed BOM.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?
Answer: Yes. Custom Android and custom Linux builds are part of the ODM programme on the WF-G family. AndroidSBC works from the reference BSP, adds the partner applications and drivers, and keeps the result on a versioned branch so Singapore teams can reproduce the build.
How are software updates and long-term support handled on the WF-G family?
Answer: Updates are staged, not pushed blind. The WF-G family ships with a staged OTA channel, rollback, remote configuration and device telemetry, so a Singapore estate can be updated site by site and a bad build can be reversed before it reaches the whole fleet.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?
Answer: Yes. For Singapore distributors the export desk can route the WF-G lot to a consolidation warehouse or FBA intake, with the IMDA conformity file and the commercial invoice prepared to the destination requirement in Singapore.
How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?
Answer: Yes. For the WF-G family AndroidSBC replaces DOA boards from buffer stock and repairs or replaces RMA units in-house, with the failure analysis returned to the Singapore integrator so the same fault does not recur on the next lot.
Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G smart guide kiosk Android motherboard family. Singapore integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Singapore buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-G family.
