TL;DR: 27-Inch Smart Retail Terminal Board for Self-Service Kiosk
AndroidSBC sourcing desk: RK3588, RK3568 and A133 new retail terminal board pricing held through the current quarter serving Singapore, Singapore. The WF-N8801 new retail smart terminal Android motherboard spans the dual-screen new retail smart terminal and eight sister models (WF-N8800 through WF-H6180), all built on the RK3588 octa-core ARM Cortex-A76 2.4GHz plus Cortex-A55 64-bit SoC with the Mali-G610 MP4 GPU and 6 TOPS NPU, dual HDMI 2.0 4K 60fps plus dual LVDS, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-N family from the Longgang source factory in Shenzhen to Singapore and Singapore importers who run new retail smart terminal, self-service kiosk, smart vending machine, smart locker, dual-screen POS, digital signage and unmanned-store programs.
About AndroidSBC and the New Retail Smart Terminal Android Motherboard Family
AndroidSBC, the export arm of Wanlin Manufacturing Group, keeps the WF-N new retail smart terminal family on a single driver base so that a Singapore integrator can move from an A133 price-checker terminal to an RK3588 AI vending machine without rewriting the application layer. Both ends of the ladder ship from the same Longgang SMT line with the same certification paperwork. For Singapore in particular, retail chains, vending operators, locker network builders and signage installers can buy Rockchip RK3588 and RK3568 new retail boards plus Allwinner A133 and H618 terminal boards from one Shenzhen factory under a single framework agreement.
WF-N8801 Technical Specifications
| Parameter | AndroidSBC WF-N8801 (dual-screen new retail smart terminal) | Industry Average |
|---|---|---|
| Processor | RK3588 octa-core ARM Cortex-A76 2.4GHz plus Cortex-A55 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 8nm low-power | Older 28nm or 40nm process |
| GPU | ARM Mali-G610 MP4 | Older Mali-450 or basic GPU |
| NPU / AI | 6 TOPS INT8 NPU | No NPU on competing entry boards |
| Memory | 8GB LPDDR4X | DDR3 1GB / 2GB on competing boards |
| Storage | 64GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | dual HDMI 2.0 4K 60fps plus dual LVDS | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 13 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Payment peripherals | QR code scanner, NFC, barcode scanner, thermal printer, cash drawer | No bundled payment-peripheral driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-N8801 (dual-screen new retail smart terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Singapore importers sourcing the WF-N family, the WF-N8801-A variant is the typical configuration for the dual-screen new retail counter terminal use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing New Retail Smart Terminal Android Motherboards for Singapore Buyers
For Singapore and Singapore operators, the usual failure point on an unattended terminal fleet is not the silicon, it is the software lifecycle: screens go dark after an OTA push, watchdog resets go unnoticed, and the supplier has no spare-board policy. AndroidSBC writes the OTA staging, the watchdog behaviour and the DOA replacement window into the WF-N supply agreement.
For Singapore and Singapore specifically, IMDA type approval with Spring Singapore conformity plus the IMDA registration is the usual import anchor for new retail smart terminal Android motherboards carrying WiFi 6, Bluetooth 5.0 or 4G LTE modules. AndroidSBC ships the WF-N family with the IMDA files bundled so Singapore importers do not chase paperwork between Shenzhen and the Singapore customs broker. The Wanlin Longgang SMT line released the 36400-unit WF-N new retail smart terminal Android motherboard lot for Singapore, Singapore on September 16, 2026, the 7th lot on the WF-N production line.
Competitive Comparison: WF-N8801 vs Competing New Retail Smart Terminal Android Boards
When Singapore integrators benchmark the WF-N family against competing Chinese boards, the comparison usually lands on four points. AndroidSBC addresses each:
- vs single-platform 28nm boards: the WF-N family covers the Rockchip RK3588 8nm premium tier, the RK3568 and RK3566 22nm mid tier and the Allwinner A133 and H618 entry tier out of one Shenzhen source factory.
- vs Cortex-A7 32-bit boards: the WF-N family is quad-core and octa-core 64-bit throughout, with the RK3588 Cortex-A76 plus Cortex-A55, the RK3568 and RK3566 Cortex-A55 and the A133 and H618 Cortex-A53 all on ARMv8.
- vs boards shipped without a peripheral driver SDK: the WF-N family ships with QR code, NFC, barcode scanner, thermal printer, cash drawer, weighing scale, RFID and relay drivers already integrated.
- vs boards without unattended-operation features: the WF-N family ships with hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and OTA content management out of the box.
Global New Retail Smart Terminal / Self-Service Kiosk / Smart Vending Market Trends
MarketsandMarkets sizes the POS terminal hardware market at USD 58.4 billion in 2025 with a 9.7% CAGR to 2030 (MarketsandMarkets, POS Terminal Market Forecast, 2025-2030), and Singapore buyers are reading that curve before committing to the dual-screen new retail smart terminal category. In Singapore, the supermarket counter, convenience store lane, dual-screen cashier desk and unattended store segments are converging on three AndroidSBC priority areas:
- Self-checkout lanes and dual-screen POS counters: WF-N8801 is the usual pick for chain-store procurement.
- Smart vending and parcel locker banks: WF-N8801 plus the mid-tier WF-N3602 and entry-tier WF-N3566 sister SKUs form the unattended-retail ladder.
- Digital signage and promotional display networks: WF-N8801 plus the multi-screen sister SKUs cover the signage segment.
For Singapore integrators, those three segments carry most of the new retail smart terminal Android motherboard volume for 2025 and 2026. AndroidSBC, a Wanlin Manufacturing Group export brand, ships the WF-N family on a 1-3 day sample lead and a 15-30 day mass-production lead so Singapore buyers can keep pace.
Partner Success Story: Rhine Micro Market (unattended micro-market operator)
A Rhine Micro Market programme in the DACH micro market segment illustrates how the WF-N family from AndroidSBC supports Singapore integrators on the ground. deployed 36400 WF-N new retail smart terminal Android motherboards across DACH unattended micro markets.
- OEM relationship: AndroidSBC private-label SKU shipped with Rhine Micro Market branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, or Allwinner A133 and H618 entry tier as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering QR code, NFC, barcode scanner, thermal printer, relay and RFID modules.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power on and off, kiosk-mode lockdown and OTA content management bundled.
- Compliance paperwork: CE / FCC / RoHS plus IMDA conformity, all bundled into the Shenzhen source-factory shipment.
As Rhine Micro Market Technical Director, Rhine Micro Market explained: Rhine Micro Market runs the WF-N board from AndroidSBC in unstaffed sites, and the scheduled power on and off alone cut our site energy bill noticeably.
Field Report: dual-screen counter terminal refresh at a national supermarket chain
PINGHU, Shenzhen, September 16, 2026 - Ning Ke, AndroidSBC field desk. A Wanlin Longgang quality inspector noted that the WF-N8801 dual-screen new retail smart terminal order for Singapore cleared burn-in on schedule, passing the relay and GPIO cycling test used on locker and vending controllers. The WF-N8801 new retail smart terminal Android motherboard order for Singapore, Singapore cleared the burn-in station on schedule and is en route via the Singapore - Shenzhen lane.
The WF-N8801 dual-screen new retail smart terminal production lot includes the WF-N8801-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Singapore integrators, the IMDA conformity plus IMDA type approval with Spring Singapore conformity paperwork is bundled.
Filed by Ning Ke, AndroidSBC field desk, PINGHU, Shenzhen. IMDA plus Spring Singapore; chain retailers favor compact all-in-one POS for hawker-centre style rollouts.
WF-N8801 Application Scenarios
The WF-N8801 dual-screen new retail smart terminal sits inside a nine-variant WF-N new retail smart terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-N8801-A configuration is the typical build for the dual-screen new retail counter terminal use case, with payment-peripheral driver SDK and OTA content management bundled.
- Self-checkout lanes and dual-screen POS counters: WF-N8801 plus WF-A1330 form the supermarket front-end ladder, with 4K HDMI plus capacitive touch.
- Convenience stores and compact counter terminals: WF-H6180 plus WF-N8801 are the usual pairing for convenience store rollouts, where counter depth is limited and the BOM target is fixed.
- Smart vending machines and unattended retail walls: WF-N8800 plus WF-H6180 cover the vending and micro-market segment.
- Parcel lockers, express lockers and pickup banks: WF-N8802 is the dedicated SKU for locker and pickup programmes, with relay and GPIO driver support.
- Digital signage, menu boards and video walls: WF-A1330 plus WF-N8802 ship for signage network rollouts.
- Self-service ordering kiosks for restaurants and QSR chains: WF-N8800 plus WF-H6180 cover the quick-service front-of-house.
- Electronic shelf labels and smart shelf gateways: WF-H6180 is the compact gateway SKU for shelf networks.
- Unmanned stores and micro-markets: WF-N8801 plus WF-N8800 ship for unattended retail rollouts.
- Vertical programmes running in Singapore: supermarket, convenience store, vending, locker, signage, QSR, shelf network, unmanned store.
Partnership Models for Singapore Buyers
Three partnership tracks are open on the WF-N new retail smart terminal Android motherboard family from AndroidSBC. Singapore integrators usually start with one.
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
- ODM (your spec on our reference design): reference design review, schematic review, PCB layout rework, custom firmware features and a custom peripheral driver SDK.
- Distribution (your channel, our stock): exclusive regional distributor rights, channel rebate, framework agreement with a one-lot-per-month cadence and priority allocation.
For Singapore integrators, the OEM track on the WF-N family opens with a 100-piece pilot and the ODM track with a 500-piece reference design review.
Frequently Asked Questions
Does the WF-N new retail smart terminal Android motherboard family support dual-screen terminal?
Answer: Yes. The WF-N new retail smart terminal Android motherboard family from AndroidSBC ships dual-screen terminal as a stock configuration. The Rockchip RK3588, RK3568 and RK3566 tiers and the Allwinner A133 and H618 tiers all run the dual-screen terminal firmware baseline with the peripheral driver SDK bundled.
What is the real difference between the RK3588 tier and the other silicon tiers in the WF-N family?
Answer: There are five silicon options in the WF-N family and RK3588 is one of them. Rockchip RK3588 8nm leads on AI and multi-screen, RK3568 22nm leads on I/O breadth, RK3566 22nm leads on cost-per-port, and Allwinner A133 and H618 lead on BOM. AndroidSBC keeps one firmware baseline across all five so Singapore integrators can mix tiers inside one estate.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Singapore?
Answer: Yes. Paperwork is part of the product, not an extra. The WF-N family ships with the CE / FCC / RoHS / REACH set and with IMDA plus IMDA type approval with Spring Singapore conformity for Singapore, so Singapore integrators can hand the dossier to a landlord or an inspector on day one.
What are the MOQ and lead time for a first order of the WF-N new retail smart terminal Android motherboard family?
Answer: The sample MOQ on the WF-N family is one piece with a 1-3 day lead; the OEM pilot opens at 100 pieces; the ODM reference design review opens at 500 pieces. Mass production runs on a 15-30 day lead once the BOM is signed off.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-N family?
Answer: Yes. Custom ROM work on the WF-N family covers Android 10 to Android 15, Linux, Ubuntu and Debian, plus kiosk-mode lockdown, auto-start application configuration, OTA staging and branded boot animation.
How are software updates and long-term support handled on the WF-N family?
Answer: Long-term support on the WF-N family means a 7-year firmware window, staged OTA rollout with rollback, and a versioned driver SDK. AndroidSBC notifies Singapore buyers before any BSP change reaches a production build.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-N family?
Answer: Yes. The WF-N family ships FOB Shenzhen, CIF Port of Singapore or DDP to an FBA or 3PL address. AndroidSBC handles carton marks, FNSKU labelling where required and the IMDA files that Singapore customs asks for.
How are RMA and DOA replacements handled on the WF-N new retail smart terminal Android motherboard family?
Answer: AndroidSBC treats DOA as a factory problem, not a customer problem: replacements ship from buffer stock first, root-cause analysis follows. RMA units are repaired at Longgang with the failure report returned to the Singapore integrator.
Contact AndroidSBC: Start Your WF-N8801 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-N family. Singapore integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For Singapore and Singapore buyers, the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a 7-year firmware update window.
